RDIx03 is a DTU of RS485-LoRaWAN independently developed by ManThink Technology Co. Ltd with highly flexible configuration and low power consumption. It is embedded with a high-performance MCU and a LoRa chip of Semtech. It can get data from several slave devices by RS-485 and uploading data to platform through LoRaWAN network.Users can quickly and flexibly configure DTU's working mode as needed,and quickly occupy the market.
Name | Defined |
N | AC-N |
L | AC-L |
485A | 485A |
485B | 485B |
120Ω | if the salve devices is long distance to RDIx03 and the communication is interfered,connect this port to 485A |
INT | I/O input |
GND | GND |
12V+ | Reserved,keep open |
key | click the key,RDIx03 will excute all query commands by RS485,and then upload data by LoRaWAN |
RU | LED indicator for system application run status. It blinks in one second when the system is running normally. |
LR | LED indicator for uplink or downlink,it will blink once when RDIx03 sending data or receiving data by LoRaWAN. |
TX | LED indicator for RS485,It blinks when RDI511A is sending data to RS485. |
RX | LED indicator for RS485,It blinks when RDI511A is receiving data from RS485. |
Operating voltage | AC 85V~270VDC/12V |
Operating temperature | -40℃ ~ 85℃ |
Working humidity | 0%~95%RH |
Protection level | IP53 |
Power | <3W |
Working frequency | 410-510MHz/863-928MHz |
Transmitting power | 20 ± 0.5dBm |
Reception sensitivity | -139dBm @292bps |
Data transmission rate | 0.3~4.5kbps |
Modulation mode | LoRa |
Supports LoRaWAN band | CN470/EU868/AU915/AS923 |
Supports LinkWAN band | CN470/AS923 |
Antenna impedance | 50Ω |