RDI4/811A is a DTU of RS485-LoRaWAN with highly flexible configuration and low power consumption independently developed by ManThink Technology Co Ltd. It is embedded with a high-performance MCU of NXP and a Radio chip SX127x of Semtech. It can get data from several slave devices by RS485 and uploading data to platform through LoRaWAN network.Users can quickly and flexibly configure DTU's working mode as needed,and quickly occupy the market.
RDI4/811A is suitable for sensors with MBUS interface, and uploading large data frequently,such as the collection of water and electricity meters.
Name | Defined |
RS-485A | RS-485A |
RS-485B | RS-485B |
NC | Reserved Port |
NC | Reserved Port |
GND | GND |
VOUT | 3.3V output |
GND | GND |
+ 5V_IN | 5V input |
Power | 12V input |
Type-c | The debugging interface downloads the TLS file to implement DTU parameter modification, testing, and other instructions. |
LoRa Antenna interface | Connect LoRa antenna |
PWE | LED indicator for power,light on when it is powered on |
RUN | LED indicator for system application run status. It blinks in one second when the system is running normally. |
RX | LED indicator for RS485,It blinks when RDI511A is receiving data from RS485. |
TX | LED indicator for RS485,It blinks when RDI511A is sending data to RS485. |
BH | LED indicator for uplink or downlink,it will blink once when RDI511 sending data or receiving data by LoRaWAN. |
4G | Retention |
Operating voltage | DC 5V/12V |
Operating temperature | -40℃ ~ 85℃ |
Working humidity | 0%~95%RH |
Protection level | IP53 |
ESD(Human Body Model) | 2000V |
Working frequency | EU433/CN470/EU868/KR920/AS923 |
Stepping frequency | 1kHz |
Transmitting power | 5 ~ 20dBm |
Reception sensitivity | -139dBm @292bps |
Air transmission rate | 292bps~5.4kbps |
Emission current typical value | 90mA @22dBm |
Harmonic suppression | ≤1GHz:<-36dBm, >1GHz:< -30dBm |
CAD/received Current (typical value) | 7mA |
Sleep current typical value | 3μA |
Antenna Impedance | 50Ω |
Size: 97mm * 90mm * 24mm